Measurement and modeling of the glass transition temperatures of multi-component solutions

Protein crystals are usually grown in multi-component aqueous solutions containing salts, buffers and other additives. To measure the X-ray diffraction data of the crystal, crystals are rapidly lowered to cryogenic temperatures. On flash cooling, ice frequently forms affecting the integrity of the sample. In order to eliminate this effect, substances called cryoprotectants are added to produce a glassy (vitrified) state rather than ice. Heretofore, the quantity of cryoprotectant needed to vitrify the sample has largely been established by trial and error. In this study, differential scanning calorimetry (DSC) was used to measure the melting (T_m), devitrification (T_d) and glass transition (T_g) temperatures of solutions with a range of compositions typical of those used for growing protein crystals, with the addition of glycerol as cryoprotectant. The addition of cryoprotectant raises the T_g and lowers the T_m of bulk solution thereby decreasing the cooling rates required for vitrification of protein crystals. The theoretical T_g value was calculated using the apparent volume fraction using the Miller/Fox equation extended for multi-component systems. The experimental values of T_g were within approximately ±4% of that predicted by the model. Thus, the use of the model holds the promise of a rational method for the theoretical determination of the composition of cryoprotectant requirement of protein crystallization solutions.     

Studies on some oxovanadium(IV) complexes of acyl pyrazolone analogues

A series of novel bidentate pyrazolone based Schiff base ligands were synthesized by interaction of 4-benzoyl-3-methyl-1-(4′-methylphenyl)-2-pyrazolin-5-one with various aromatic amines like aniline, o-,m-,p-chloroaniline and o-,m-,p-toluidine in a ethanolic medium. All of these ligands have been characterized on the basis of elemental analysis, IR and ¹H NMR data. The molecular geometries of five of these ligands have been determined by single crystal X-ray study. Crystallographic study reveals that these ligands exist in the amine-one tautomeric form in the solid state. NMR study also suggests the existence of the amine-one form in solution at room temperature. Ab initio calculations for representative ligand HL¹ has been carried out to know the coordination site of the ligand. Novel vanadium Schiff base complexes of these ligands with general formula [OV(L^1–7)₂(H₂O)] have been prepared by interaction of aqueous solution of vanadyl sulfate pentahydrate with DMF solution of the appropriate ligands. The resulting complexes have been characterized on the basis of elemental analysis, vanadium determination, molar conductance and magnetic measurements, thermo gravimetric analysis, infrared and electronic spectral studies. Suitable distorted octahedral structures have been proposed for these complexes.     

Importance of micellar kinetics in relation to technological processes

The association of many classes of surface-active molecules into micellar aggregates is a well-known phenomenon. Micelles are in dynamic equilibrium, constantly disintegrating and reforming. This relaxation process is characterized by the slow micellar relaxation time constant, tau(2), which is directly related to the micellar stability. Theories of the kinetics of micelle formation and disintegration have been discussed to identify the gaps in our complete understanding of this kinetic process. The micellar stability of sodium dodecyl sulfate micelles has been shown to significantly influence technological processes involving a rapid increase in interfacial area, such as foaming, wetting, emulsification, solubilization, and detergency. First, the available monomers adsorb onto the freshly created interface. Then, additional monomers must be provided by the breakup of micelles. Especially when the free monomer concentration is low, which is the case for many nonionic surfactant solutions, the micellar breakup time is a rate-limiting step in the supply of monomers. The Center for Surface Science & Engineering at the University of Florida has developed methods using stopped flow and pressure jump with optical detection to determine the slow relaxation time of micelles of nonionic surfactants. The results showed that the ionic surfactants such as SDS exhibit slow relaxation times in the range from milliseconds to seconds, whereas nonionic surfactants exhibit slow relaxation times in the range from seconds (for Triton X-100) to minutes (for polyoxyethylene alkyl ethers). The slow relaxation times are much longer for nonionic surfactants than for ionic surfactants, because of the absence of ionic repulsion between the head groups. The observed relaxation times showed a direct correlation with dynamic surface tension and foaming experiments. In conclusion, relaxation time data of surfactant solutions correlate with the dynamic properties of the micellar solutions. Moreover, the results suggest that appropriate micelles with specific stability or tau(2) can be designed by controlling the surfactant structure, concentration, and physicochemical conditions (e.g., salt concentration, temperature, and pressure). One can also tailor micelles by mixing anionic/cationic or ionic/nonionic surfactants for a desired stability to control various technological processes.     

Co-activation of Gi and Gq proteins exerts synergistic effect on human platelet aggregation through activation of phospholipase C and Ca2+ signalling pathways

Our previous studies have shown that subthreshold concentrations of two platelet agonists exert synergistic effects on platelet aggregation. Here we studied the mechanism of synergistic interaction of 5-hydroxytryptamine (5-HT) and epinephrine mediated platelet aggregation. We show that 5-HT had no or little effect on aggregation but it did potentiate the aggregation response of epinephrine. The synergistic interaction of 5-HT (1-5 microM) and epinephrine (0.5-2 microM) was inhibited by alpha2-adrenoceptor blocker (yohimbine; IC50= 0.4 microM), calcium channel blockers (verapamil and diltiazem with IC50 of 10 and 48 mM, respectively), PLC inhibitor (U73122; IC50=6 microM) and nitric oxide (NO) donor, SNAP (IC50=1.6 microM)). The data suggest that synergistic effects of platelet agonists are receptor-mediated and occur through multiple signalling pathways including the activation PLC/Ca2+ signalling cascades.     

Salvinicins A and B, new neoclerodane diterpenes from Salvia divinorum

[reaction: see text] Two new neoclerodane diterpenes, salvinicins A (4) and B (5), were isolated from the dried leaves of Salvia divinorum. The structures of these compounds were elucidated by spectroscopic techniques, including (1)H and (13)C NMR, NOESY, HMQC, and HMBC. The absolute stereochemistry of these compounds was assigned on the basis of single-crystal X-ray crystallographic analysis of salvinicin A (4) and a 3,4-dichlorobenzoate derivative of salvinorin B.     

Supramolecular assemblies of a naturally derived sophorolipid

Acidic sophorolipid (SL) molecules derived from yeasts represent a novel type of asymmetrical bolaamphiphiles due to their unique structural features that include an asymmetrical polar head size (disaccharide vs COOH), a kinked hydrophobic core (cis-9-octadecenoic chain), and a non-amide polar-nonpolar linkage. Light microscopy, small- and wide-angle X-ray scattering, FT-IR spectroscopy, and dynamic laser light scattering were used to investigate the supramolecular structures of the self-assembled aggregates of SL molecules at different pH values. In acidic conditions (pH < 5.5), giant twisted and helical ribbons of 5-11 microm width and several hundreds of micrometers length were observed for the first time. Increase in solution pH values slowed ribbon formation, decreased ribbon yield, and increased the helicity and entanglements of the giant ribbons. An interdigitated lamellar packing model of acidic SL-COOH molecules with a long period of 2.78 nm, stabilized by both the strong hydrophobic association between the cis-9-octadecenoic chains and strong disaccharide-disaccharide hydrogen bonding, is proposed. The neutralization of SL-COOH in water to SL-COONa produced clear solutions with the formation of short-range ordered aggregates. At concentrations below 1.0 mg/mL, the size of self-assembled aggregates increased as the concentration increased. At concentrations above 1.0 mg/mL, narrowly distributed micellar aggregates with a constant hydrodynamic radius (R(h)) of about 100 nm are formed. The large micelles show strong angular dependence with the fast mode appearing at scattering angle theta >/= 60 degrees.     

Photophysical properties of anthanthrene-based tunable blue emitters

Anthanthrene (1) derivatives substituted at the 4,10 and 6,12 positions (2-6) were synthesized as promising candidates for organic light emitting diodes (OLEDs). The emission of these compounds can be manipulated in the blue region (lambda(max) = 437-467 nm) through structural modifications. Photophysical and electrochemical properties (phi(F) = 0.20-0.47; tau(F) = 2.97-6.06 ns; HOMO-LUMO energy gap = 2.25-2.56 eV) as well as geometry optimized structures of 1-6 are reported.     

Process improvement in acetone-butanol production from hardwood by simultaneous saccharification and extractive fermentation

The acetone-butanol production by simultaneous saccharification and extractive fermentation (SSEF) was investigated. In the SSEF employing cellulase enzymes andClostridium acetobutylicum, both glucan and xylan fractions of pretreated aspen are concurrently converted into acetone and butanol. Continuous removal of the fermentation products from the bioreactor by extraction was an important factor that allowed long-term fed-batch operation. The use of membrane extraction prevented the problems of phase separation and extractant loss. Increase in substrate feeding as well as reduction of nutrient supply was found to be beneficial in suppressing the acid production, thereby improving the solvent yield. Because of prolonged low growth conditions prevalent in the fed-batch operation, the butanol-to-acetone ratio in the product was significantly higher at 2.6–2.8 compared to the typical value of two.